How to Fix a Dent in a Stainless Steel Refrigerator

Try Using a Plunger!

Nicks and dents in stainless steel appliances can be resolved by using a plunger. Yes, it’s the same plunger that you use in bathrooms and drains. Apply this hand tool to the affected area and try to suck the dent out. The dent should “pop” out!

Stainless steel appliances always add to the look and feel of your home kitchen. However, try as you might, sometimes damages are destined, especially in case of appliances in busy homes. Stainless steel refrigerators are prone to dents. Although a dent may not affect the refrigerator operation, it may cause it to look unsightly. Dents on steel appliances are easily detectable due to the reflective properties of the metal.

The easiest way out would be to push the dent from the opposite end so that it pops out. However, this does not work out with all metals. Hence, we need to resort to alternate ways of repair. Fixing a dent in a stainless steel refrigerator is simple and doesn’t pinch your pocket. This Buzzle article covers some trustworthy dent removal methods that you can follow and take care of the problem all by yourself.

Using Dry Ice

o Dry ice

o Hair dryer

o Damp cloth (for wiping)

o Soft cloth (for dry ice)

> Take a clean, damp cloth and wipe the damaged area so that the dent is clearly visible. By doing so, you will also be ensuring that no sticky substance, food, or dust particles remain behind.

> What you need now is dry ice. You can get it from a nearby hardware store or grocery shop. Once you buy dry ice, remember to keep it in a foam cooler because it tends to evaporate quickly.

> Before applying dry ice, you need to heat the dented area, for which you can make use of a hair dryer. Alternately, you can make use of a heat gun. Apply heat to the area for 30 seconds to a minute so that the metal expands.

> Wear your gloves (preferably thick), and place a portion of dry ice in a soft cloth. This is so that you avoid the occurrence of scratches on the already affected area.

> Apply pressure using the dry ice pack to the center of the dent, and rub over the area in a circular motion. Do this for a minute.

> You should hear a “pop” sound after the dry ice application. The heat and cold variation applied to the dented area should serve the purpose.

Pointers

» Remember to adjust the hair dryer to warm or medium-heat setting in order to avoid overheating.

» Never touch dry ice with bare hands. Always wear a pair of gloves while handling it.

Using Compressed Air

o Clean moist cloth

o Hair dryer

o A can of compressed air

> Take a clean, moist cloth and wipe the dented area.

> Similar to the dry paintless dent repair Atlanta ice procedure, this time too, apply heat to the affected area using a hair dryer. Apply heat for a good 30 seconds directly on the dent, so that the metal is allowed to expand.

> Now, take a can of compressed air (or air duster) – this is the same spray that you use for computer keyboards to clear out the dust. Invert the can and spray the contents onto the damaged area. This should freeze the dent.

> You can repeat step (ii) and (iii), if the “pop” sound is not heard. If the procedure fails to give you the desired result even after a second time, then seek professional help.

Pointers

» See that the propellants from the can are not sprayed accidentally onto your bare hands.

» Do not touch the frozen area (after applying compressed air) with bare hands.

Using a Suction Cup

o Damp cloth

o Suction cup

> First of all, clean the area with a moist cloth. The dampness itself will provide for a positive seal.

> Now, what you need is a suction-cup dent puller which will be available in hardware stores or automotive part stores. Place the suction cup over the dent and press it in and out to ensure that you get a tight grip.

> Once you achieve a tight seal on the dent, pull it straight out. Doing this (by applying suction) should pull the dent out, getting it back to its original shape. Even if not repaired entirely, the area will at least https://www.amazon.com/Pops-dent-Dent-Repair-Popper/dp/B0015D88U0 look better than it previously did.

If the above-mentioned dent repair methods don’t work, call for professional help. Hiring someone to fix it might not be cheap, but it’s better than replacing the appliance entirely. Check if your appliance is within the warranty period to save on your expenses.

Laos picks new Communist Party chief | Reuters

Laos’s Communist Party on Friday chose Bounnhang Vorachit to be its new leader after a vote by a newly formed central committee that did not include the prime minister and former party chief, signaling their political exits.

The country’s official KPL news agency said Bounnhang, the 78-year-old current vice president, won the leadership vote on Friday at the five-yearly congress of the secretive party. It did not announce the names of the new elite politburo.

The selection was anticipated by experts, who see a continuation of soho15.org a status quo in which power is tightly controlled by the party while pursuing strong economic expansion, which has averaged 7.8 percent since 2011.

The outgoing party chief and president, Choummaly Sayasone, 79, who held both posts since 2006, and Prime Minister Thongsing Thammavong, 71, were among four serving politburo members who did not apply to join the top committee, state media said.

Bounnhang was top of the list of a new 77-member central committee announced on Friday, which saw all 39 members who applied for re-election chosen.

Second on the list was National Assembly chairwoman and former central bank governor Pany Yathotu, a development that suggests a move up in the party hierarchy to be a possible prime minister, according to Martin Stuart-Fox, a Laos expert and retired professor of the University of Queensland.

The prime minister and cabinet posts were not scheduled to be announced at the congress.

“The most significant promotion has been Madame Pany,” he said, adding she was now “a very powerful figure”.

State media did not say why Thongsing and Choummaly, who have been politburo members since 1991, did not seek re-election.

Laos has close political ties to communist Vietnam and mirrors its political system. Both countries are holding their five-yearly congresses this week.

Communist neighbor China has been vying aggressively for influence on Laos, however, providing scholarships, aid, loans and infrastructure investment to a fledgling $12-billion economy 862 times smaller than its own.

Growth in Laos has been driven by investment, mining and sales abroad of most its growing hydropower output, largely to Thailand. This has boosted incomes and access to electricity, telecoms and healthcare for its mostly rural population of 6.8 million.

Foreign media have not been permitted to cover the congress. A senior foreign ministry press official said there was insufficient time to invite international media.

(Reporting by Martin Petty in Hanoi; Additional reporting by My Pham; Editing by Clarence Fernandez)

China completes first human trial with CRISPR-edited genes

China completes first human trial with CRISPR-edited genes

The idea http://www.abraauto.com/auto-body-shop-glass-windshield-paintless-dent-repair-services/paintless-dent-repair-removal/ behind the continued monitoring is to ensure that the edited cells act as they should. That is, that their (now deactivated) PD-1 proteins no longer halt a cell’s immune response and let cancer spread. “The hope is, without PD-1, the edited cells will attack and http://www.soho15.org/ defeat the cancer,” Nature wrote.

This might not be the silver bullet against cancer, though. Naiyer Rizvi from Columbia University’s Medical Center posits that the gene editing process could encounter a roadblock because it’s a complex procedure and isn’t very scalable — especially compared to other methods like using antibodies.

“Unless it shows a large gain in efficacy, it will be hard to justify moving forward,” he said.

Cooling off in the vast and overflowing public pools of New York City

Cooling off in the vast and overflowing public pools of New York City

In 1933, President Franklin D. Roosevelt began to introduce the New Deal, a series of economic and social programs designed to pull the United States out of the Great Depression.

The New Deal era saw an explosion of federally sponsored public works projects. After the construction of highways, the largest share of New Deal spending went to the creation of public parks and recreation areas.

In New York City, Mayor Fiorello LaGuardia appointed Robert Moses the sole commissioner of the Parks Department. Moses assembled an army of designers, engineers and construction supervisors and oversaw the creation of hundreds of playgrounds, 53 recreational buildings, 10 golf courses and three zoos in just a few years.

To the great relief of New Yorkers in the sweltering summer of 1936, the city also opened 11 enormous outdoor pools with an average capacity of 5,000 people. These photos from the NYC Parks Department Photo Archive capture the ecstatic crowds that flocked to these urban oases.

The New Age Miracle Cure by Steven Magill

PDR paintless dent removal: AMAZING miracle cure for dents.

Ever had a hailstorm only to discover that it’s taken its toll on your car via tiny dents all over it! Yes, time and again we have all faced some form of damage to the surface of our cars – and each time it happens, our heart breaks a little more. After all, we’re all possessive about our cars – it’s personal. It’s yours.

So what do you do next?

So now you’ve had this dent in your car and you’re looking for a method of fixing it. You could go the conventional way and call up the standard dent removal companies. But then imagine what your car would look like with varying hues of the same color at different places on the car surface? Hideous, right? That’s where modern day technology comes to the rescue – it’s called mobile paintless dent removal. It’s efficient, effective and best of all you don’t need to even lift a finger! This is a new technique that is slowly catching up among dent removal companies. It involves gentle massaging of the dents without any damage to surface paint.

Why is mobile paintless dent removal so great?

One reason why this new age technique works so great is because it never hurts the paint on your car! With highly sophisticated tools, the damage is addressed from its root cause – from behind the paint. That means no more sanding, no more painting over the surface and definitely no body filling needed! Mobile paintless dent removal involves carefully working upon each dent to restore it back to its original shape and size. In fact after the repair no one would ever be able to tell that your car suffered a dent! This technique is a highly skilled art – one that necessitates in-depth expertise and qualifications. Very few companies have the necessary expertise to carry it off but the few that do – they’re well worth spending on. The best thing about mobile paintless dent removal is that these technicians will come to you – you will never need to go to them for repair work on your car.

203

Origins of this method

It all started in the early 1980s – when mobile paintless dent removal was still at its fledgling stages. In those times, it was restricted to only very small dents that could easily be removed. However, as this technique began to gain popularity, the PDR or Paintless Dent Removal technicians began trying it on bigger dents. Very soon they found that even huge dents could be completely eliminated without leaving a trace behind!

Exceptions to the rule: scenarios where mobile paintless dent removal may not work

Just as in any other case, even in this dent removal technique, there are certain situations where the method may not work as well as expected. The technique will not work if there happens to be a crack on the surface paint. It may be possible if there are edges.

Most of the automobiles are suitable candidates for mobile paintless dent removal.

How do I fix a dent in my car?

You probably don’t want to drive around with an unsightly dent in your passenger-side door. So, what should you do about that baseball or other car door-induced ding in your car? Here are three approaches:

Try to fix it yourself

If the paint isn’t affected by the dent, you can try the do-it-yourself route. You will need some tools, including a few different sizes of body hammers. You will also need some dollies. Check out what tools you already have at your disposal and see which DIY method works best in your situation.

If you have a little ding, you may be able to fix the problem with a hair dryer and dry ice or a can of condensed air. (You don’t want to try this on a dent with any paint damage.)

Heat the dented area with a hair dryer, making sure to hold it five to seven inches away from the panel. Keep the hair dryer moving, and continue for one to three minutes. The area should be warm to touch.

While it is still warm, apply the cold component. Make sure you wear thick gloves when you handle dry ice. Swirl the dry ice around, or spray the compressed air on the dent. The metal should react to the cold and flatten out.

A word of warning. Terry Haltom, education manager for the collision repair and refinish (CRRT) program at Universal Technical Institute (UTI) in Sacramento, Calif., says that he does not recommend using do-it-yourself products because the products use a glue that can cause damage to your paint and won’t work out the complex dents.

Settle for a temporary fix

If you don’t have the time or the budget to fix a down-to-the-metal problem right away, you can buy time with a temporary fix.

“Remember that bare metal and the environment don’t like each other very much,” says Matt Cutaia, vice president collision manager at Gates Automotive Center in Rochester, N.Y.

“Left untreated, exposed, raw metal on the body of your car can rust in just a matter of weeks.  Add in the oxidizing effects of road salt, and you can cut that time down to days in this portion of http://paintlessdentrepairfortworth.info/ the country during the winter months. “

You can use Vaseline to seal out moisture and create a barrier, but Cutaia says that you will have to clean off the Vaseline and reapply frequently for this to work effectively. You can also apply clear nail polish to the scratched area.

“It may not look the most appealing, but you’ll have the peace of mind in knowing that rust won’t develop quite as quickly,” Cutaia says.

Another option involves giving your car a quick paint touch-up. Find out the manufacturer’s code for the color of your car so you get it right the first time.

Leave the fixing to the professionals

Haltom lists the following steps that a technician will do to fix a dent:

The technician will remove the paint from the dent.

Then, they will work the metal out so the least amount of body filler or putty is needed to finalize the repair.

They will do some sanding of the filler to make it flat, smooth and match the body contour. At this point, the tech will feather out the paint (sand it), so when primer is applied it will be the correct thickness.

Typically, adjacent panels will have to be scuffed and painted for a proper color match and blend.

At this point, it gets detailed.

Both Cutaia and Haltom recommend taking your car to a professional for serious dents and long-term fixes. The average price for dent repair depends on the size of the damaged area and where you go to get it fixed.